ES2P Series Mounting Kit

Cart Summary

•	Your Cart is Empty
•	View Cart

Search

Navigation

•	Catalog
	•	Murphy
		•	Pressure & Vacuum
		•	Temperature
		•	Level
		•	Vibration - Time - Overspeed
		•	Magnetic Switches & Tattletale® Annunciators
		•	Engine Panels
			•	Swichgage® Panel Kits for Engines
			•	Automatic Engine Control Panel
			•	MurphyLink™ Series M110 & M310 Panels
			•	Engine Panel Accessories
			•	Swichgage® Mounting Brackets
				•	Stainless Single Gage Panel (30050782)
				•	Red Single Gage Panel (30050032)
				•	Stainless Double Gage Panel (30050783)
				•	Stainless Triple Gage Panel (30050784)
				•	Stainless Five-Hole Gage Panel (30050527)
				•	Panel Mount, f/ TL7 & SAH (65050512)
				•	2Kit,Mounting;A (30000213) Series Mounting Kit
		•	Engine & Motor Controls
		•	Compressor Controls
		•	Valves
		•	Electric Gages
		•	Gen Set Controls
		•	PowerView™ & MurphyLink™ Series
	•	Trombetta
	•	Testo
	•	Compliance Controls
	•	Denso
	•	SENS
	•	Hewitt Industries
	•	DynaGen Technologies
	•	MurCal's Toolbox

2Kit,Mounting;A (30000213) Series Mounting Kit

Our Off-Equipment Mounting Kit is designed to facilitate mounting the Murphy ESP and ES2P series Pressure Senders in an isolated manner as to reduce vibration from the engine.

Included in the kit are the following:
1 - stainless steel panel (30050782)
2 - shock mounts (65000149) with hardware
2 - PD2160 pressure snubbers

The stainless steel panel is 3-1/4" high by 3-1/4" wide with a centered 2" hole for the sender. The base, created by the sharp 90 degree bend at the bottom of the panel, measures 1" deep. Hole centers on the base are 2-1/4" apart. For more information on the additional parts needed for installation, please take a look at the instruction sheet available in pdf format below.

Installation Instructions

Price: $20.33

Tell a Friend

Customers Also Bought

ES2P-100 (05701858) Pressure Sender

The ES2P-100 is a 2-wire ungrounded pressure sender for use with electric pressure gages. Rated at 100 psi maximum.

Price: $32.00

EL150K1 (15700116): Liquid Level Swichgage®

The EL150K1 Liquid Level Swichgage® instrument is a combination liquid level gauge and low limit switch. It can be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.

Price: $85.00

20P-100 (05703115) : Pressure Swichgage®

The 20P-100 Pressure Swichgage® is a 2" dial, diaphragm-actuated pressure-indicating gage with a built-in electrical limit switch. This dual-scale instrument has a range of 0-100 psi.

Price: $34.00

518APH-12 (25700147) Tattletale®

518APH-12: 12 Volt Tattletale® Annunciator

Price: $40.50

20T-250-6-1/2 (10702043) Temperature Swichgage®

The 20T-250-6-1/2 is a 2" Temperature Swichgage® with a steel case, a 6 foot capillary length with standard 1/2-14 NPT threading and a temperature range of 130-250° F.

Price: $48.50

Adapter Nut (10050069): 3/8 A Bulb

The 3/8 A Bulb Adapter Nut is designed to reduce the connection threading from 1/2-14 NPT to 3/8-18 NPT.

Price: $5.00

L129 Lube Level Swichgage® (15700104)

The L129 Lube Level Swichgage® instrument is a combination lube level indicating gage and adjustable low and high limit switch. It provides protection against low oil level or high level caused by overfill or fuel or water seepage into the crankcase.

Price: $97.50

117PH (25700074) Tattletale®

117PH: 12/24 Volt Tattletale®

Price: $34.00

VM-12 (65700262): Voltmeter

The VM-12 is a 12VDC Voltmeter Gage with an 8-18V range, an impact and weather resistant polyester case, polycarbonate lens and a stainless steel bezel.

Price: $22.25