|
PowerView™ Analog Gages
|
|
The PowerView™ Analog Gages (PVA) are a series of intelligent gages designed to display easy-to-read information transmitted by the PowerView™. The PVA gages communicate with the PowerView™ via a single RS485 twisted pair MODBUS® RTU serial link. The gages can be daisy-chained using quick-connect harnesses with water-tight connectors.
The PVA gages also include features such as smooth stepper motor operation for the 270° sweep pointer, an environmentally sealed case with two Deutsch DT style connectors molded into the casing, and green LED back lighting. They are available for standard 2-1/16 in. (52 mm) and 3-3/8 in. (86 mm) diameter hole sizes. In addition, their plastic cases incorporate a “D” shape allowing panel cutouts that eliminate gage rotation during installation. All PowerView™ analog gages can be powered by 12 or 24 VDC systems.
A major feature of the PVA gages is their balance between design and functionality. These modern gages offer a selection of lens and bezel styles and colors. Because of this variety, the MurCal on-line web store stocks several of the most popular PVA gages. Call the inside sales department at MurCal to discuss the other bezel options that are available as a special order from FW Murphy.
|
|
|
|
PowerView® PVA20 Analog Gages
|
|
The PowerView® PVA20 Analog Gages are a series of intelligent gages designed to display easy-to-read information transmitted by the PowerView. The PVA20 gages, available for standard 2-1/16 in. (52 mm) diameter hole sizes, communicate with the PowerView via a single RS485 twisted pair MODBUS® RTU serial link. |
|
|
PowerView® PVA35 Analog Gages
|
|
The PowerView® PVA35 Analog Gages are a series of intelligent gages designed to display easy-to-read information transmitted by the PowerView. The PVA35 gages, available for standard 3-3/8 in. (86 mm) diameter hole sizes, communicate with the PowerView via a single RS485 twisted pair MODBUS® RTU serial link. |
|
|
PowerView® PVCAN Analog Gages
|
|
The PowerView® CAN Gages (PVCAN) are a series of intelligent gages designed to display easy-to-read information broadcast over the SAE J1939 communications. These gages are designed to be wired directly to the J1939 CAN bus without the need of another device driving them. |
|
|
Murphy MDDM20 / MLA20 Analog Gages
|
|
Murphy’s MDDM20 Series Display and Diagnostic Modules feature a Deutsch Connector. The MLA20 Series are MurphyLink Gages with no contacts for signaling. |
|
|
|
|