CANdrive™ CDV100F: Electric Gage Interface

Cart Summary

•	Your Cart is Empty
•	View Cart

Search

Navigation

•	Catalog
	•	Murphy
		•	Pressure & Vacuum
		•	Temperature
		•	Level
		•	Vibration - Time - Overspeed
		•	Magnetic Switches & Tattletale® Annunciators
		•	Engine Panels
		•	Engine & Motor Controls
		•	Compressor Controls
		•	Valves
		•	Electric Gages
		•	Gen Set Controls
		•	PowerView™ & MurphyLink™ Series
			•	PowerView™ Displays & CANdrive™
				•	PV101-A (78700244) : PowerView™ Display Module
				•	PV450-V: PowerView™ 450 with Video
				•	PV750-V: PowerView™ 750
				•	CANdrive™ CDV100F ONLY (79700001): Electric Gage Interface
				•	CANdrive™ CDV300R (78700364): Electric Gage Interface
				•	CANdrive™ CDV100F w/ CDV-PW-30 Harness (78700363): Electric Gage Interface
			•	PowerView™ Wiring Harnesses
			•	PowerView™ Analog Gages
			•	HelmView Marine Display Modules
			•	MurphyLink™ Series M110 & M310 panels
			•	FuelCAN J1939 Interface Module
	•	Trombetta
	•	Testo
	•	Compliance Controls
	•	Denso
	•	SENS
	•	Hewitt Industries
	•	DynaGen Technologies
	•	MurCal's Toolbox

CANdrive™ CDV100F ONLY (79700001): Electric Gage Interface

As part of the MurphyLink™ family, the CANdrive™ CDV100F is an Electric Gage Interface for modern electronic engines. The CANdrive™ acts as an interface between ECU CANbus/J1939 transmitted data and standard electric indicating gages. CANdrive™ and electric gages are an alternative solution to retrofitting of engine senders, magnetic pickups and associated wiring.

CANdrive™ has dedicated outputs for a tachometer, oil pressure and coolant temperature electric gages. Configurable switches allow for selectivity between 12 or 24 VDC systems, and for all gage outputs to be selected as either Murphy, VDO or Datcon.

CANdrive™ is packaged in a compact, surface mounted case with epoxy encapsulation for maximum durability and environmental sealing. Electrical connection is via a 12-way automotive-type connector. The CDV100F is a 1x CAN status LED with the connector positioned forward.

Sales Bulletin
Installation & Operations Manual

Price: $68.50

Tell a Friend

Customers Also Bought

EL150K1 (15700116): Liquid Level Swichgage®

The EL150K1 Liquid Level Swichgage® instrument is a combination liquid level gauge and low limit switch. It can be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.

Price: $85.00

PVW-P-12 (78000124): PowerView CAN & Power Harness

The PVW-P-12 is a 12 inch CAN and Power Harness designed specifically for the PowerView Display Module and PVA series analog gages.

Price: $67.50

20T-250-4-1/2 (10702042): Temperature Swichgage®

The 20T-250-4-1/2 is a 2" Temperature Swichgage® with a steel case, a 4 foot capillary length with standard 1/2-14 NPT threading and a temperature range of 130-250° F.

Price: $47.25

L129 Lube Level Swichgage® (15700104)

The L129 Lube Level Swichgage® instrument is a combination lube level indicating gage and adjustable low and high limit switch. It provides protection against low oil level or high level caused by overfill or fuel or water seepage into the crankcase.

Price: $97.50

ES2P-100 (05701858) Pressure Sender

The ES2P-100 is a 2-wire ungrounded pressure sender for use with electric pressure gages. Rated at 100 psi maximum.

Price: $32.00

PVW-J-9 (78000121): PowerView 9" Jumper Harness

The PVW-J-9 is a 9 inch Jumper Harness designed specifically for the PowerView Display Module and PVA series analog gages.

Price: $28.25

SS300-24 (20700167) Electronic Speed Switch

The SS300-24 Electronic Speed Switch is a 24 volt single set point speed switch with SPDT relay dry contact output.

Price: $123.75

PVJR (78000128): PowerView Terminating Resistor

PVJR: PowerView Terminating Resistor

Price: $11.00

LM2000 Lube Level Maintainer (15700660)

The LM2000 is a Lube Level Maintainer that monitors and replenishes the crankcase oil level of an engine, pump or compressor.

Price: $83.25