|
IX3212 – Power Distribution Module (PDM) E2443053 |
 |
 |
 |
IX3212: PowerCore® Intelligent Xpansion™ Power Distribution Module (PDM) (E2443053)
The IX3212 Power Distribution Module is a SERVICE PART, intended for replacement of your existing Power Distribution Module with the same model number.
Murphy’s PowerCore® Intelligent Xpansion™ Power Distribution Module (PDM) expands CAN bus control networks by replacing existing relay and fuse boxes with more reliable, solid-state switches that can directly drive work lights, wiper motors, cooling fans, directional DC motors and other high-current loads. Featuring digital switching and up to 15-amp outputs, the module is housed in a compact, fully sealed enclosure which can be mounted remotely on the equipment to greatly reduce wiring costs.
Larger Image: IX3212 Power Distribution Module (Main Image)
Larger Image: IX3212 Power Distribution Module (Alternate Views)
Standard Features:
• More Reliable Than Fuse and Relay Technology
• Compact, Sealed, Robust Enclosure
• Enhanced Diagnostics and Protection
• Cuts Wire Harness Costs
Each of the 12 PDM outputs can switch or proportionally control up to 15 A loads in 2.5 A increments and feature over-current detection and shut-down capability. Outputs are paired to run up to six electric motors with H-bridge IX3212 direction control. Twelve digital inputs monitor switched battery, ground and floating inputs. Additionally, eight 0-5V analog inputs are available with a 5V sensor supply.
Wiring length is reduced, and harness costs are cut by remotely locating the IX module near loads and signals. Then the I/O is multiplexed using a CAN bus network, which allows engineers to greatly simplify harness design for ease of installation and improved reliability. For applications not requiring a CAN bus control, the inputs can directly trigger outputs without a need for a separate controller.
Specifications:
• Operating Voltage: 8-32V (IX3212-24) for 12V and 24V systems
• Total Current: 70 A maximum continuous
• Dimensions: 245 mm (L) x 140 mm (W) x 50 mm (H)
• Mass: 0.9 kg (2.0 lb)
• Operating Temperature: -40° F to 185° F (-40° C to 85° C)
• Storage Temperature: -40° F to 275° F (-40° C to 135° C)
• Electrical and EMI/EMC:
2004/108/EC and 2006/95/EC directives
IEC 61000-4-3, -4-6 and -4-8
EN 60945 / CISPR 11
EN 61326-1
• Shock: 30 G, 3 cycles
• Vibration: 5-25 g, 50-2,000 Hz, 72 hrs per axis
• Sealing: IP66 and 67, SAE J1455 4.5.3 (10,300 kPa @ 50° C and 100 mm away for 15 min)
Part Number: E2443053
Literature:
IX3212 Datasheet
IX3212 Technical Sales Bulletin
|
|
 |
If you like this item, you May also like these: |
|
|
|
 |
|
|
|
|
|
|
|