Register | Log In
 


Cart Summary
Your Cart is Empty
View Cart
Search
 
 
Navigation
Catalog
Murphy
SENS
Trombetta
Compliance Controls
FT-33 Full Authority Valve
FT Cable 50
MAP Cable 50: 50 Foot MAP Sensor Cable
MAP Sensor: Manifold Absolute Pressure Sensor
FT Flange Adaptor - FT FLG-2F40
KTC-12: Type K Thermocouple
Compliance KTC-18 Type K Thermocouple (18 Inches)
NM-10: 10 Foot Data Cable
200203 Passive Magnetic Pickup (MAG-PU)
MEC-R
Davis Instruments
MurCal's Toolbox


FT-60 Full Authority Valve
Z21538(240).jpg The FT-60 from Compliance Controls is an electrically actuated, full authority valve, that controls all fuel flow to the carburetor or mixer. The Valve position responds proportionally to the valve command.

The FT-60 full authority fuel valve has a bore size of 60 MM. Command input from the MEC-R or MEC-L control is a pulse width modulated signal along with an outside power source between 9-32 VDC.

The valve gives a position feedback to the MEC-R or MEC-L that varies from 0.5 to 4.5 vDC.

One valve is required for each control bank on the engine.
Price: $2,250.00

 
 
Tell a Friend


Related Items
Z21539(80).jpg
FT Cable 50
 (Out of Stock)The FT Cable 50 is designed specifically to work with the FT Full Authority Valve. The valve comes in various sizes like 60 and 33 MM. This cable works with all the FT valves. It is 50 feet long and can be cut to fit your particular application.
Price: $250.00
 
Z21540(80).jpg
FT Flange Adaptor - FT FLG-2F40
 (Out of Stock)Full Authority control valve adaptors to 2" NPT. This is a convenient adaptor designed to fit up with the FT-33 and FT-60 control valves.
Price: $125.00
 
Related Items
Z21542(80).jpg
HEGO Cable 100: 100 Foot HEGO Sensor Cable
 (Out of Stock)The HEGO Cable 100 is designed specifically to work with the HEGO 4 wire Sensor. It is 100 feet long and can be cut to fit your particular application.
Price: $220.00
 
Z21539(80).jpg
FT Cable 50
 (Out of Stock)The FT Cable 50 is designed specifically to work with the FT Full Authority Valve. The valve comes in various sizes like 60 and 33 MM. This cable works with all the FT valves. It is 50 feet long and can be cut to fit your particular application.
Price: $250.00
 
Z21544(80).jpg
MAP Cable 50: 50 Foot MAP Sensor Cable
 (Out of Stock)The MAP Cable 50 is designed specifically to work with the Manifold Absolute Pressure (MAP) sensor. This sensor feeds engine load information to the AFR for precise adjustment of the Air / Fuel ratio.
Price: $225.00
 
Z21543(80).jpg
MAP Sensor: Manifold Absolute Pressure Sensor
The Manifold Absolute Pressure (MAP) sensor feeds engine load information to the AFR for precise adjustment of the Air / Fuel ratio.
Price: $200.00
 
Z21529(80).jpg
O2 Nut: 18 MM Weld Coupling for HEGO Sensor
18 MM coupling for Installation of the HEGO Sensor into the exhaust piping. Made of 304 Stainless Steel. Female.
Price: $25.00
 
EL150K1(80).jpg
EL150K1 Liquid Level Swichgage®
The EL150K1 Liquid Level Swichgage® instrument is a combination liquid level gauge and low limit switch. It can be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.
Price: $80.00
 
Z21528(80).jpg
HEGO Sensor: Heated Exhaut Gas Oxygen Sensor
The HEGO sensor from Compliance Controls is used to sense the oxygen level in the exhaust gas. This value is used to optimize the air / fuel ratio while the engine is running.
Price: $165.00
 
Z22258(80).jpg
TK-6 Supplemental Trim Valve
TK-6 Supplemental Trim Fuel Valve. This valve is used to enrich the fuel portion of the Air / Fuel ratio.
Price: $1,185.00
 
Z21540(80).jpg
FT Flange Adaptor - FT FLG-2F40
 (Out of Stock)Full Authority control valve adaptors to 2" NPT. This is a convenient adaptor designed to fit up with the FT-33 and FT-60 control valves.
Price: $125.00