Register | Log In
Catalog
 


Cart Summary
• Your Cart is Empty
• View Cart
Search
Search
 
 
Navigation
• Catalog
• Murphy
• SENS
• Trombetta
• Compliance Controls
• MEC-L
• FT-60 Full Authority Valve
• FT-33 Full Authority Valve
• FT Cable 50
• MAP Cable 50: 50 Foot MAP Sensor Cable
• MAP Sensor: Manifold Absolute Pressure Sensor
• FT Flange Adaptor - FT FLG-2F40
• KTC-12: Type K Thermocouple
• Compliance KTC-18 Type K Thermocouple (18 Inches)
• NM-10: 10 Foot Data Cable
• 200203 Passive Magnetic Pickup (MAG-PU)
• MEC-R
• Davis Instruments
• MurCal's Toolbox


200523-40 Harness for Magnetic Pickup
mpi.Z20039(240).jpg This Cable is 40 Feet Long and contains a twisted pair of wires with a foil shield to protect against electrical noise from coupling with the speed signal. It is designed specifically for use with the 200203 Passive Magnectic Pickup.

The end is terminated with a mating connector that screws directly to the pickup and allows for easy servicing of the sensor. The connector is keyed so that the pin connection is identical each time the cable is used.
Price: $150.00  (Out of Stock)

 
 
Tell a Friend


Related Items
mpi.Z20033(80).jpg
200203 Passive Magnetic Pickup (MAG-PU)
This Passive Magnetic Pickup is used with the Murphy Power Ignition systems and the Compliance Controls Air Fuel Ratio controllers.
Price: $155.00
 
Related Items
EL150K1(80).jpg
EL150K1 Liquid Level Swichgage®
The EL150K1 Liquid Level Swichgage® instrument is a combination liquid level gauge and low limit switch. It can be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.
Price: $80.00
 
Z21528(80).jpg
HEGO Sensor: Heated Exhaut Gas Oxygen Sensor
The HEGO sensor from Compliance Controls is used to sense the oxygen level in the exhaust gas. This value is used to optimize the air / fuel ratio while the engine is running.
Price: $165.00
 
Z21542(80).jpg
HEGO Cable 100: 100 Foot HEGO Sensor Cable
 (Out of Stock)The HEGO Cable 100 is designed specifically to work with the HEGO 4 wire Sensor. It is 100 feet long and can be cut to fit your particular application.
Price: $220.00
 
Z21544(80).jpg
MAP Cable 50: 50 Foot MAP Sensor Cable
 (Out of Stock)The MAP Cable 50 is designed specifically to work with the Manifold Absolute Pressure (MAP) sensor. This sensor feeds engine load information to the AFR for precise adjustment of the Air / Fuel ratio.
Price: $225.00
 
Z21543(80).jpg
MAP Sensor: Manifold Absolute Pressure Sensor
The Manifold Absolute Pressure (MAP) sensor feeds engine load information to the AFR for precise adjustment of the Air / Fuel ratio.
Price: $200.00
 
Z21529(80).jpg
O2 Nut: 18 MM Weld Coupling for HEGO Sensor
18 MM coupling for Installation of the HEGO Sensor into the exhaust piping. Made of 304 Stainless Steel. Female.
Price: $25.00
 
Z21538(80).jpg
FT-60 Full Authority Valve
60 MM Full Authority Fuel Valve. This valve is placed after the final cut regulator and varies the gas flow into the engine.
Price: $2,250.00
 
Z21539(80).jpg
FT Cable 50
 (Out of Stock)The FT Cable 50 is designed specifically to work with the FT Full Authority Valve. The valve comes in various sizes like 60 and 33 MM. This cable works with all the FT valves. It is 50 feet long and can be cut to fit your particular application.
Price: $250.00
 
Z22258(80).jpg
TK-6 Supplemental Trim Valve
TK-6 Supplemental Trim Fuel Valve. This valve is used to enrich the fuel portion of the Air / Fuel ratio.
Price: $1,185.00
 
© 2008 Murcal, Inc.