|
|
| C3-3 Centurion Display Module (50700959) |
 |
 |
|
The Centurion C3-3 Display Module and controller combination is expressly designed to meet the requirements of three specific kinds of applications:
• Screw Compressors
• Reciprocating Compressors
• Pumps
The heart of the Centurion system is the main input/output (I/O) module or controller, which can be mounted on a standard DIN rail. While it is designed to work with any Modbus (Master) compliant HMI (Human Machine Interface) or with no operator interface at all, it is optimally configured and field-configurable through MConfigPro™, powerful software developed to configure the controller.
Parameters can be modified in the field without special need for laptop or software by utilizing Murphy’s specially programmed controller display. The controller is designed to monitor, control, protect, and optimize small to medium sized gas operated compressors and pumps in the field. Proper operation is maintained by monitoring set points and digital, analog, and thermocouple input points and providing the logic to take corrective and/or proactive steps. The Auto-Start capabilities of the C3 Series allows for start/stop based on parameters such as pressure set points or by digital signals.
The controller also allows for controlled shut down and no-flow monitoring as well as auto start up, and engine control capabilities. The controller provides real-time data via communications ports to a connected display and/or supervisory system. This advanced system offers multiple options for remote communications and operation. The industry standard RTU Modbus protocol means greater support for a wide variety of communication equipment including radio and satellite communications systems.
Features:
* System is expandable to meet most 3-stage compressor applications.
* No programming experience required.
* Local and remote communications, Modbus RTU via RS485/232.
* USB 1.1 support for laptops without a serial port.
* Approved for Class I, Division 2, Groups B, C, & D Areas.
* Last 20 Shutdown History List
* Active Alarm List
* 10 Maintenance Timers
* Run Hourmeter
* 128 x 64 pixel LCD Display with yellow backlight.
* 12-key keypad for set point entry, alarm acknowledgement, start, stop, reset, etc.
* 2 Serial Ports - software configurable.
* Customizable Process Screens (line-by-line, gage, and PID).
* Power Input: 10-32 VDC.
Sales Bulletin
Installation & Operations Manual (75 pages - It will take a minute or two to download - please be patient)
Centurion Display Screen Map
|
|
|
|
|
|
|
