|
| ASM150-14 Automatic Engine Controller |
|
 |
|
The ASM150-14 is a user friendly, solid state, automatic engine controller. It provides basic automatic start/stop capabilities plus other features found on more sophisticated and expensive controllers. This compact, solid-state unit operates from 12 or 24 volt battery, and features selectable crank and rest cycles, sensing circuit for crank disconnect and over-speed, over-crank, and re-crank protection on false starts. Four LEDs indicate first-out shutdown for: low pressure, high temperature, over-crank and over-speed. A fifth LED indicates engine running.
The ASM150-14 is housed in a corrosion-resistant case, mounts flush in a panel and requires very little room. It's the perfect solution for small generators or engine panels.
Power Input: 12 or 24 VDC.
Operating Temperature: -40 to 185°F (-40 to +85°C).
Inputs: Ground or positive inputs for high temperature or low pressure sensors.
Outputs: 5A relay for cranking and fuel valve. 300 mA transistor for fault annunciation.
Cycle Crank Timer: Up to 8 attempts. Re-cranks on false starts (fixed 30 seconds).
Crank/Rest Cycle Timing: 4 to 25 seconds (adjustable).
Lockout Time Delay: 1 to 25 seconds (adjustable). Locks out low oil and high temperature on start-up.
Sales Bulletin
Installation Instructions
|
|
|
|
Related Items |
|
|
|
|
|
|
|
|
|
