|
|
| EA150 (30700024): Automatic Engine Controller |
 |
 |
|
The EA150 Automatic Engine Controller provides you with simple–yet sophisticated, engine automation. It features basic automatic start/stop capabilities plus other features found on more sophisticated and expensive controllers–all in an easy to install panel.
• Automatic Engine Controller with Built-in SWICHGAGE® Instruments And Hourmeter
• Quick and Easy to Install
• Advanced, Rugged, Reliable Microprocessor Based Design
• Very Competitive Low Cost
• Operates On 12 or 24 Volt Systems
• First-out Shutdown LED
The EA150 operates from 12 or 24 volt systems. It includes crank and rest cycles, sensing circuit for crank disconnect and overspeed, overcrank, and re-crank on false starts. Four LEDs indicate first-out shutdown for: low pressure, high temperature, overcrank and overspeed. A fifth LED for engine running indicates when crank disconnect occurs.
The built-in oil pressure and water temperature SWICHGAGE® instruments provide visual indication and can be set to initiate shutdown on critical pressure and temperature.
The electromechanical quartz base hourmeter can record up to 9,999.9 hours. It is housed in a shockproof case and built to be rugged and durable for a long life.
A selector switch allows you to manually select the operation sequence.
The EA150 Automatic Engine Controller features the following:
• Compact Design
• Adjustable Overspeed circuit
• Adjustable Overcrank circuit
• Adjustable Shutdown Lockout Delay
• Adjustable Crank Disconnect Setpoint
• Engine Running Indication LED
• Re-Cranks Engine on False Starts
• Advanced Microprocessor Technology Offers Reliability, Small Size, and Low Cost
• Convenient Hat Bracket design for simple engine mounting
• Built-in Hourmeter
• Temperature SWICHGAGE®
• Oil Pressure SWICHGAGE®
• Operates On 12 or 24 volt systems
Specifications for the EA150 Automatic Engine Controller:
Power Input: 12 or 24 VDC.
Operating Temperature: -40 to 185°F (-40 to +85°C).
Outputs: 5 A relay for cranking and fuel valve. 300 mA transistor for engine annunciation.
Cycle Crank Timer: Up to 8 attempts. Re-Cranks on false starts (fixed 30 seconds).
Crank/Rest Cycle Timing: 4 to 25 seconds (adjustable).
Shutdown Time Delay: 1 to 25 seconds (adjustable). Locks out low oil and high temperature on start-up.
Crank Disconnect Speed Setting: From 30 to 8500 Hz.
Overspeed Trip Point Setting: From 30 to 8500 Hz.
Magnetic Pickup Input: Requires 2V rms minimum.
Shipping Weight: 5 lbs. 4 ozs. (2.38 kgs.).
Shipping Dimensions: 9-3/4" x 9-1/2" x 6" (248 x 241 x 152 mm).
Sales Bulletin
|
|
|
|
Customers Also Bought |
|
|
|
|
|
|
|
|
|
