Replacement Boot: RP2307B and RP2308B

Cart Summary

•	Your Cart is Empty
•	View Cart

Search

Navigation

•	Catalog
	•	Murphy
		•	Pressure & Vacuum
		•	Temperature
		•	Level
		•	Vibration - Time - Overspeed
		•	Magnetic Switches & Tattletale® Annunciators
		•	Engine Panels
		•	Engine & Motor Controls
			•	EMS PRO Series - Engine Monitoring System Controllers
			•	Automatic Engine Controllers: Auto Start & Auto Start/Stop Controllers
			•	Electronic Monitoring Systems/Controllers
			•	Electric Motor Controllers
			•	Throttle Controller
			•	DC Solenoids & Rack Pullers
			•	Accessories for Engine Control
				•	Throttle Cable Assembly (00004630)
				•	RP75 Cable Assembly, 48" (40010034)
				•	RP75 Chain Pull Assembly (40010056)
				•	Clevis Yoke Assembly (65010108)
				•	Clevis Yoke Chain Assembly (65010110)
				•	Replacement Boot RP2307B and RP2308B (00002222)
				•	Replacement Boot RP2309B and RP2310B (00003439)
				•	Replacement Stud for RP2300 Series (40050315)
				•	Inline (Straight) Ball Connector (00002457)
				•	90 Degree Ball Connector (00002458)
		•	Compressor Controls
		•	Valves
		•	Electric Gages
		•	Gen Set Controls
		•	PowerView™ & MurphyLink™ Series
	•	Trombetta
	•	Testo
	•	Compliance Controls
	•	Denso
	•	SENS
	•	Hewitt Industries
	•	DynaGen Technologies
	•	MurCal's Toolbox

Replacement Boot RP2309B and RP2310B (00003439)

Replacement Boot: Used on the RP2309B and the RP2310B. Black Rubber with vent hole.

Price: $11.75

Tell a Friend

If you like this item, you May also like these:

RP2309B (40700094) 12 Volt Push/Pull DC Solenoid

The Murphy RP2309B is a 12 Volt Push/Pull DC Solenoid that gives a one and a half inch stroke at 14 pounds, and holds up to 34 pounds at full voltage, continuous duty.

Price: $80.25

RP2310B (40700095) 24 Volt Push/Pull DC Solenoid

The Murphy RP2310B is a 24 Volt Push/Pull DC Solenoid that gives a one and a half inch stroke at 14 pounds, and holds up to 34 pounds at full voltage, continuous duty.

Price: $80.25

Customers Also Bought

EL150K1 (15700116): Liquid Level Swichgage®

The EL150K1 Liquid Level Swichgage® instrument is a combination liquid level gauge and low limit switch. It can be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activate alarms and/or shut-down at a predetermined minimum level.

Price: $85.00

518APH-12 (25700147) Tattletale®

518APH-12: 12 Volt Tattletale® Annunciator

Price: $40.50

20P-100 (05703115) : Pressure Swichgage®

The 20P-100 Pressure Swichgage® is a 2" dial, diaphragm-actuated pressure-indicating gage with a built-in electrical limit switch. This dual-scale instrument has a range of 0-100 psi.

Price: $34.00

117 (25700071) Magnetic Switch

117: 12/24 Volt Magnetic Switch

Price: $34.00

20T-250-4-1/2 (10702042): Temperature Swichgage®

The 20T-250-4-1/2 is a 2" Temperature Swichgage® with a steel case, a 4 foot capillary length with standard 1/2-14 NPT threading and a temperature range of 130-250° F.

Price: $47.25

20T-250-6-1/2 (10702043) Temperature Swichgage®

The 20T-250-6-1/2 is a 2" Temperature Swichgage® with a steel case, a 6 foot capillary length with standard 1/2-14 NPT threading and a temperature range of 130-250° F.

Price: $48.50

L129 Lube Level Swichgage® (15700104)

The L129 Lube Level Swichgage® instrument is a combination lube level indicating gage and adjustable low and high limit switch. It provides protection against low oil level or high level caused by overfill or fuel or water seepage into the crankcase.

Price: $97.50

VS2 (20700042) Shock & Vibration Switch

VS2: Shock & Vibration Switch

Price: $120.75

Adapter Nut (10050069): 3/8 A Bulb

The 3/8 A Bulb Adapter Nut is designed to reduce the connection threading from 1/2-14 NPT to 3/8-18 NPT.

Price: $5.00