|
S500-A300: 120 Volt Electronic Control Module
|
|
Trombetta's S500-A300 electronic control is built for single-winding solenoid applications, and gives you the option of using AC or DC voltage for the Aux trigger signal. This module accepts your 2-wire switched input (90-130VAC or 12-24V) and applies full voltage to the solenoid coil. After the actuation time the module reduces the output voltage to the solenoid to 13% - 16% of the input voltage for continuous duty. This reduced voltage level is applied to the coil until the power is removed. The A300 module will adjust its duty cycle depending on the line voltage, and offers an LED display. The LED will display if the module is in the pull or hold mode and will indicate lower power cut-off since the last trigger request. |
|
|
|
|
|